Current divider

What is a current divider?

A current divider, also known as a current splitter, is an electrical circuit that divides a current into two or more paths. It is a fundamental concept in electrical engineering and is used in many applications, including power supplies, electronic circuits, and battery charging systems. The main purpose of a current divider is to distribute the current evenly among different components in a circuit.

A current divider consists of two or more resistors connected in parallel. The current flowing through the circuit is divided among the resistors according to their resistance values. The current divider rule states that the current through each resistor is proportional to its resistance value. This means that the resistor with the highest resistance value will receive the smallest share of the current, while the resistor with the lowest resistance value will receive the largest share of the current.

How does a current divider work?

A current divider works by providing multiple paths for the current to flow through. The total current flowing into the circuit is divided among the parallel branches of the circuit. The amount of current flowing through each branch depends on the resistance of the branch. The higher the resistance, the lower the amount of current flowing through the branch.

The current divider rule is based on Ohm’s Law, which states that the current flowing through a resistor is directly proportional to the voltage across the resistor and inversely proportional to the resistance of the resistor. By applying Ohm’s Law to each resistor in the circuit, the current divider rule can be calculated. This rule is useful in designing circuits with multiple resistors, as it allows the designer to predict the amount of current flowing through each resistor.

Example of current divider application

A common example of a current divider application is in battery charging systems. In these systems, the current is divided among multiple batteries to ensure that each battery receives an equal charge. This is important because if one battery receives a higher current than the others, it can be damaged or overcharged. By using a current divider circuit, the current can be distributed evenly among the batteries, ensuring that they all receive the same amount of charge.

Another example of a current divider application is in electronic circuits. In these circuits, the current is divided among multiple components, such as LEDs or resistors. By using a current divider circuit, the current can be distributed evenly among these components, preventing any one component from receiving too much current and becoming damaged.

Calculating current division in a circuit

To calculate the current division in a circuit, the current divider rule can be applied. This rule states that the current through each resistor is proportional to its resistance value. The formula for calculating the current through each resistor is:

Ii = It(Rt/Ri)

Where Ii is the current through the ith resistor, It is the total current flowing in the circuit, Rt is the total resistance of the circuit, and Ri is the resistance of the ith resistor.

For example, if a circuit has three resistors with values of 10 ohms, 20 ohms, and 30 ohms, and a total current of 1 amp is flowing in the circuit, the current through each resistor can be calculated as follows:

I1 = 1(60/10) = 6 amps
I2 = 1(60/20) = 3 amps
I3 = 1(60/30) = 2 amps

This calculation shows that the current through each resistor is proportional to its resistance value, with the highest resistance receiving the smallest share of the current and the lowest resistance receiving the largest share of the current.

header - logo

The primary purpose of this project is to help the public to learn some exciting and important information about electricity and magnetism.

Privacy Policy

Our Website follows all legal requirements to protect your privacy. Visit our Privacy Policy page.

The Cookies Statement is part of our Privacy Policy.

Editorial note

The information contained on this website is for general information purposes only. This website does not use any proprietary data. Visit our Editorial note.

Copyright Notice

It’s simple:

1) You may use almost everything for non-commercial and educational use.

2) You may not distribute or commercially exploit the content, especially on another website.