Electromagnetic Induction – en

Electromagnetic Induction

Electromagnetic induction is a fundamental principle in electromagnetism that describes the process of generating an electric current in a conductor by varying the magnetic field around it. This phenomenon was first discovered by Michael Faraday in 1831 and later mathematically described by James Clerk Maxwell.

Electromagnetic induction is based on several fundamental theories and laws in physics. Some of the key principles include:

  1. Faraday’s Law of Electromagnetic Induction: Discovered by Michael Faraday in 1831, this law states that the electromotive force (EMF) induced in a closed loop of wire is directly proportional to the rate of change of magnetic flux passing through the loop. Mathematically, it can be expressed as:

EMF = -dΦB/dt


  • EMF is the induced electromotive force (measured in volts)
  • dΦB is the change in magnetic flux (measured in webers)
  • dt is the change in time (measured in seconds)
  1. Lenz’s Law: Discovered by Heinrich Lenz in 1834, this law is a consequence of the principle of conservation of energy. It states that the direction of the induced EMF and the resulting current will always be such that it opposes the change in magnetic flux that caused it. Lenz’s Law can be represented by the negative sign in Faraday’s Law equation.

Applications of Electromagnetic Induction

Electromagnetic induction has numerous applications in various fields of technology and industry. Some of the most common applications include:

  1. Electrical Generators: These devices convert mechanical energy into electrical energy by rotating a coil of wire within a magnetic field. As the coil rotates, the magnetic flux through the coil changes, inducing an electromotive force (EMF) and generating an electric current.
  2. Transformers: Transformers are used to change the voltage and current levels in alternating current (AC) circuits. They consist of two coils of wire (primary and secondary) wound around a common magnetic core. When an AC current flows through the primary coil, it generates a changing magnetic field, which in turn induces a voltage in the secondary coil based on the coil turns ratio.
  3. Induction Motors: Induction motors are widely used in industry and home appliances. They operate by inducing a current in the rotor, which interacts with the stator’s magnetic field to produce torque. The rotor is not directly connected to a power source, which makes induction motors more reliable and low-maintenance compared to other types of electric motors.
  4. Inductive Charging: This technology uses electromagnetic induction to wirelessly transfer energy between two coils, one in the charging station and the other in the device being charged (e.g., smartphones or electric vehicles). The charging station generates an alternating magnetic field, which induces a current in the device’s coil, thus charging the battery.
  5. Inductive Sensors: Inductive proximity sensors detect the presence of metallic objects without physical contact by using electromagnetic induction. When a metal object approaches the sensor’s coil, it disturbs the magnetic field and alters the coil’s inductance, triggering the sensor.
  6. Induction Cooking: Induction cooktops use electromagnetic induction to heat cookware directly, making them more energy-efficient and responsive than traditional electric or gas cooktops. An alternating current flows through a coil beneath the cooktop surface, creating a rapidly changing magnetic field. This magnetic field induces eddy currents in the magnetic cookware placed on the cooktop, generating heat within the cookware itself, rather than heating the cooktop surface and then transferring the heat to the cookware.
  7. Metal Detectors: Metal detectors use electromagnetic induction to identify the presence of metal objects. A transmitter coil generates an alternating magnetic field, which induces eddy currents in nearby metal objects. These eddy currents, in turn, create their own magnetic field, which is detected by a receiver coil in the metal detector.
  8. Magnetic Levitation (Maglev) Trains: Maglev trains use electromagnetic induction to levitate above the tracks, reducing friction and allowing for higher speeds. The train’s underside is fitted with powerful electromagnets that interact with the guideway, inducing currents that generate a magnetic field. This magnetic field repels the train from the guideway, allowing it to levitate and move forward.
  9. Wireless Power Transmission: Electromagnetic induction can be used to wirelessly transmit power over short distances, such as powering devices implanted in the human body or providing power to remote sensors.
  10. Energy Harvesting: Some devices can harness ambient energy, like vibrations or oscillatory motion, and convert it into electrical energy through electromagnetic induction. This energy can be used to power low-power electronics or recharge batteries.

These applications demonstrate the versatility and importance of electromagnetic induction in modern technology, improving the efficiency and functionality of various devices and systems.

Simple Example

Imagine a simple experimental setup where you have a solenoid (a coil of wire) connected to a galvanometer (a sensitive instrument used to measure small electric currents). The solenoid is not connected to any external power source.

Now, take a bar magnet and quickly move it towards the solenoid with the north pole facing the coil. As the magnet moves closer, the magnetic field within the solenoid changes. According to Faraday’s Law of Electromagnetic Induction, this change in magnetic flux induces an electromotive force (EMF) in the solenoid, which generates an electric current.

The galvanometer connected to the solenoid will show a deflection, indicating the presence of an induced current. The direction of the induced current, as per Lenz’s Law, will be such that it opposes the change in magnetic flux. In this case, the current will flow in a direction that creates a magnetic field inside the solenoid opposing the magnet’s field.

When you stop moving the magnet, the galvanometer returns to zero, indicating that no current is flowing through the solenoid. If you now move the magnet away from the solenoid, the galvanometer will again show a deflection, but in the opposite direction. This is because the induced current now flows in a direction that supports the change in magnetic flux, as the magnet’s field is decreasing inside the solenoid.

This simple example demonstrates how a changing magnetic field can induce an electric current in a conductor.

header - logo

The primary purpose of this project is to help the public to learn some exciting and important information about electricity and magnetism.

Privacy Policy

Our Website follows all legal requirements to protect your privacy. Visit our Privacy Policy page.

The Cookies Statement is part of our Privacy Policy.

Editorial note

The information contained on this website is for general information purposes only. This website does not use any proprietary data. Visit our Editorial note.

Copyright Notice

It’s simple:

1) You may use almost everything for non-commercial and educational use.

2) You may not distribute or commercially exploit the content, especially on another website.